G Series 2-3.5T Diesel Forklift
G Series Internal combustion balance weight forklift
The G series is built to international standards, and to boost your productivity, consider this, the drive train is powered by an indigenous,
Powerful engine that is environment friendly. And an indigenous powershift automatic torque converter transmi-sion with soft touch electric gear shift and inching control for precise load and truck movements. with travel speeds of up to 20km/h and lift/lower speeds of 0.5m/set; with gradeability of up to 20%, few forklifts can match the G series in performance. You also have lifting height options up to 6 meters and a range of fitments and attachments such as clamps for paper reels, drums, bales, etc.
With its unsurpassed travel speed,you can service more stations faster.
The lifting and lowering speeds are faster. The small turning radios ensure that you move between aisles fasters. Your operations can work smarter as there is better visibility and comfort at all times.And with cycle times reduced you will see how the G series can do wonders to your productivity.
Of all the features in the G series, comfort comes first. No other vehicle offers your operator more comfort. Check this out. An isolated operator's cell with adjustable steering wheel and operator's seat, and a seat belt for safety. Spaccious leg room. Soft touch accelerator and brake pedal for fatigue free operation. Cowl mounted angled hydraulic control levers so that the oper-ator does not have to ‘reach out'. A solenoid switch shuts offer vengine effortlessly. Feather touch power steering that makes maneuvering a pleasure. And an adjustable steering where the tilt can be adjusted to suit the operator.
An operator cell placed on rubber mounts absorbs engine vibration.
Special insulation under the engine hood and foam beading work together to keep out the heat and sound. All of which ensures that your operator gives you twice as much for half the effort.
Safety is another features that you can take for granted with the G series, It has a neutral start switch that prevents the vehicles from starting in gear. The brake fluid levels can be monitored by the operator at all times. And it also comes with load lowering control valve and hose burst valve and hose burst valve that takes care of any emergencies. G series also include LPG fueled trucks where emissions are only what you get in the kitchen. The G series engines conform to US EPA Tire II and EURO II norms.
The truck has minimal emission, noise and vibrations, Which in fact conforms to the SINOLIFT philosophy of technology that is not just user-friendly but also eco - friendly.
The G series has been designed to ensure minimum servicing. A coolant based system helps you fill it and forget it. An easy-to-see container helps you monitor the brake fluid And a unique testing facility helps you check the functioning of the LED indicators on the dashboard panel. Besides, the single piece engine hood is equipped with a gas spring for easy service access. The presence of a lateral power steering reducces the number of moving parts. The sub - assemblies are accessible and weld laid out. All of which means that with the G series you are assured of maximum uptime.
General | Manufacturer | G Series SINOLIFT 2.0T-3.0T Diesel Forklift Specificaitons | |||||
Model | CPCD20G-D1 | CPCD25G-D1 | CPCD30G-D1 | CPCD35G-D1 | |||
CPCD20G-W1 | CPCD25G-W1 | CPCD30G-W1 | CPCD35G-W1 | ||||
***** | ***** | CPCD30G-W2 | CPCD35G-W2 | ||||
***** | ***** | CPCD30G-Y3 | CPCD35G-Y3 | ||||
Power type | Diesel | ||||||
Rated capacity | kg | 2000 | 2500 | 3000 | 3500 | ||
Load center | mm | 500 | 500 | 500 | 500 | ||
Dimension | Lift height H | mm | 3000 | 3000 | 3000 | 3000 | |
Free lift height H4 | mm | 140 | 140 | 145 | 145 | ||
Fork size L*W*T | mm | 1070*120*40 | 1070*120*45 | 1070*125*45 | 1075*130*45 | ||
Mast tilt angle α/β | deg | 6/11 | 6/11 | 6/11 | 6/11 | ||
Front overhang X | mm | 484 | 489 | 494 | 500 | ||
Overall dimension | Length to fork face L1 | mm | 2564 | 2634 | 2775 | 2814 | |
Overall width B1 | mm | 1150 | 1150 | 1236 | 1236 | ||
Mast lowered height H1 | mm | 2050 | 2050 | 2080 | 2230 | ||
Mast extended height H3 | mm | 4040 | 4040 | 4273 | 4273 | ||
Overhead guard height H2 | mm | 2150 | 2150 | 2180 | 2180 | ||
Performance | Turning radius R | mm | 2220 | 2290 | 2400 | 2490 | |
Travel speed (full load/no load) | km/h | 17/19 | 17/19 | 18/19 | 18/19 | ||
Lift speed (full load/no load) | mm/sec | 470 | 470 | 430 | 400 | ||
Max. Gradeability | % | 20 | 20 | 20 | 15 | ||
Service weight | kg | 3510 | 3810 | 4320 | 4620 | ||
Chassis | Tyre | Front | 7.00-12-12PR | 7.00-12-12PR | 28/9-15-12PR | 28x9-15-14PR | |
Rear | 6.00-9-10PR | 6.00-9-10PR | 6.50-10-10PR | 6.50-10-10PR | |||
Tread | Front B2 | mm | 970 | 970 | 1000 | 1000 | |
Rear B3 | mm | 970 | 970 | 970 | 970 | ||
Wheelbase Y | mm | 1650 | 1650 | 1700 | 1760 | ||
Ground clearance (full load/no load) | Mast M | 85/105 | 85/105 | 110/135 | 110/135 | ||
Frame F | mm | 140/145 | 140/145 | 170/175 | 170/175 | ||
Drive units & Control | Engine | Type | D1 | W1 | W2 | Y3 | |
Model | DACAI CA498 | ISUZU C240PKJ | ISUZU 4JG2 PE | Yanmar 4TNE98 | |||
Rated output (kw/rpm) | 45/2500 | 34.5/2500 | 44.9/2450 | 44.3/2300 | |||
Rated torque (N.m/rpm) | 190/1800 | 139/1800 | 186.3/1600~1800 | 206/1700 | |||
No.of cylinder | 4 | 4 | 4 | 4 | |||
Bore*stroke(mm) | 98*105 | 86*102 | 95.4*107 | 98*110 | |||
(L)Displacement | 3.168 | 2.369 | 3.059 | 3.319 | |||
Remark: | |||||||
1. Special lifting height available. | |||||||
2. Attachment available. | |||||||
3. The specification in the table are for standard models only . For further information ,please contact us. |